OBD 2007 Lite vs. OBD 2007
|
Features
|
OBD 2007 Lite
|
OBD 2007
|
OBDII Services:
|
|
|
01 - Current Power train Diagnostic Data.
|
 |
 |
02 - Power train Freeze Frame Data.
|
 |
 |
03 – Emission-Related Diagnostic Trouble Codes.
|
 |
 |
04 – Clear/Reset Emission-Related Diagnostic Information.
|
 |
 |
05 – Oxygen Sensor Monitoring Test Results.
|
 |
 |
06 – On-Board monitoring Test Results for specific monitored systems.
|
 |
 |
07 – Emission-related Diagnostic Trouble Codes detected during last drive cycle.
|
 |
 |
08 – Control of On-Board System components.
|
 |
 |
09 – Vehicle Information.
|
 |
 |
Supports the following:
|
|
|
Continuous real time digital display of up to 90 Pids of power train data.
|
 |
 |
Continuous real time graphic display of up to 90 Pids of power train data.
|
 |
 |
Automatically supports all vehicle protocols including J1850 PWM, J1850 VPW, ISO
9141, ISO 14230, and ISO 15765 (11 and 29 bit CAN).
|
 |
 |
Display of Vehicle readiness - Continuous and Non Continuous monitoring and monitor
status.
|
 |
 |
Display of Freeze frame pid data as stored in the vehicle’s ECU.
|
 |
 |
Displays both stored and pending Diagnostic Trouble Codes.
|
 |
 |
Clearing/Resetting engine MIL light.
|
 |
 |
Display of Oxygen sensor data.
|
 |
 |
Display of On Board monitoring of non continuous tests.
|
 |
 |
Display of vehicle information including VIN number.
|
 |
 |
Display of virtual dashboard for display of real time data, including an instantaneous
fuel consumption gauge.
|
 |
 |
Logging of diagnostic data and real time data.
|
 |
 |
Logging of OBDII data suitable for importing in Microsoft’s Excel.
|
 |
 |
Displays data in either Metric or Imperial, automatically adjusting based on the
Window’s Region setting.
|
 |
 |
Sensor information can be individually selected or deselected.
|
 |
 |
Display of vehicle’s OBD compliance, protocol and scan tool interface and version.
|
 |
 |
Sensors display current, minimum, maximum and average values.
|
 |
 |
Connection support by either Bluetooth, serial or USB. Com and baud rate
saved for future sessions after initial selection.
|
 |
 |
Summary display of vehicle’s supported services.
|
 |
 |
Connection tab displays real time hexadecimal data for those conversant with SAE
J1979 or ISO 15031-5.
|
 |
 |
OBD Terminal mode for those who wish to directly send commands to the scan tool
or the vehicle’s ECUs.
|
 |
 |
Incremental adjustment of Elm 327 timeout value to maximize sensor response speed.
|
 |
 |
Fully incorporated help manual of our easy to read OBD 2007 Program Guide.
|
 |
 |
Version check with our server for program version updates and integrated download
of new versions for registered users.
|
 |
 |
Automatic discovery of correct com port and factory set baud rate of scan tool.
|
 |
 |
Support for high speed baud rates up to 2.0Mbps.
|
 |
 |
Additional modules:
|
|
|
Extensive Dashboard and Fuel Analysis gauges.
|
 |
 |
Graphic data module. The ability to graph any 4 pids in real time.
|
 |
 |
Mapping module.
|
 |
 |
Playback module.
|
 |
 |
Acceleration test module.
|
 |
 |